Merge pull request #86 from Patrick762/ac200l

Ac200l support and manifest fix

README.md

@@ -17,6 +17,9 @@ After the installation, you can use this button to install the integration:
 ### Supported devices:
 
 - AC60
+- AC180 (basic data)
+- AC180P (basic data)
+- AC200L (untested)
 - AC200M
 - AC300 (tested)
 - AC500

custom_components/bluetti_bt/__init__.py

@@ -33,6 +33,8 @@ _LOGGER = logging.getLogger(__name__)
 async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     """Set up Bluetti Powerstation from a config entry."""
 
+    _LOGGER.debug("Init Bluetti BT Integration")
+
     address = entry.data.get(CONF_ADDRESS)
     device_name = entry.data.get(CONF_NAME)
     use_controls = entry.data.get(CONF_USE_CONTROLS)
@@ -53,10 +55,12 @@ async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     hass.data[DOMAIN][entry.entry_id].setdefault(DATA_POLLING_RUNNING, False)
 
     # Create coordinator for polling
+    _LOGGER.debug("Creating coordinator")
     coordinator = PollingCoordinator(hass, address, device_name, polling_interval, persistent_conn, polling_timeout, max_retries)
     await coordinator.async_config_entry_first_refresh()
     hass.data[DOMAIN][entry.entry_id].setdefault(DATA_COORDINATOR, coordinator)
 
+    _LOGGER.debug("Creating entities")
     platforms: list = PLATFORMS
     if use_controls is True:
         _LOGGER.warning("You are using controls with this integration at your own risk!")
@@ -65,6 +69,8 @@ async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     # Setup platforms
     await hass.config_entries.async_forward_entry_setups(entry, platforms)
 
+    _LOGGER.debug("Setup done")
+
     return True
 
 

custom_components/bluetti_bt/bluetti_bt_lib/base_devices/ProtocolV1Device.py

@@ -29,13 +29,6 @@ class ProtocolV1Device(BluettiDevice):
         # Battery
         self.struct.add_uint_field("total_battery_percent", 43)
 
-        # Battery packs
-        self.struct.add_uint_field("pack_num_max", 91)  # internal
-        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
-        self.struct.add_uint_field("pack_num", 96)  # internal
-        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
-        self.struct.add_uint_field("pack_battery_percent", 99)
-
         # Output state
         self.struct.add_bool_field("ac_output_on", 48)
         self.struct.add_bool_field("dc_output_on", 49)
@@ -56,20 +49,10 @@ class ProtocolV1Device(BluettiDevice):
             ReadHoldingRegisters(36, 4),
             ReadHoldingRegisters(41, 1),
             ReadHoldingRegisters(43, 1),
-            ReadHoldingRegisters(91, 2),
-            ReadHoldingRegisters(96, 1),
-            ReadHoldingRegisters(98, 2),
             ReadHoldingRegisters(48, 2),
+            ReadHoldingRegisters(3007, 2),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
-        return [range(3006, 3008)]
+        return [range(3006, 3009)]
-
-    @property
-    def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return [
-            ReadHoldingRegisters(91, 2),
-            ReadHoldingRegisters(96, 1),
-            ReadHoldingRegisters(98, 2),
-        ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac180.py

@@ -0,0 +1,8 @@
+"""AC180 fields."""
+
+from ..base_devices.ProtocolV2Device import ProtocolV2Device
+
+
+class AC180(ProtocolV2Device):
+    def __init__(self, address: str, sn: str):
+        super().__init__(address, "AC180", sn)

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac180p.py

@@ -0,0 +1,8 @@
+"""AC180P fields."""
+
+from ..base_devices.ProtocolV2Device import ProtocolV2Device
+
+
+class AC180P(ProtocolV2Device):
+    def __init__(self, address: str, sn: str):
+        super().__init__(address, "AC180P", sn)

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac200l.py

@@ -0,0 +1,59 @@
+"""AC200L fields."""
+
+from typing import List
+
+from ..utils.commands import ReadHoldingRegisters
+from ..field_enums import AutoSleepMode, OutputMode
+from ..base_devices.ProtocolV1Device import ProtocolV1Device
+
+
+class AC200L(ProtocolV1Device):
+    def __init__(self, address: str, sn: str):
+        super().__init__(address, "AC200L", sn)
+
+        # Details
+        self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
+        self.struct.add_decimal_field("internal_current_one", 72, 1)
+        self.struct.add_uint_field("internal_power_one", 73)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
+        self.struct.add_uint_field("internal_dc_input_voltage", 86)
+        self.struct.add_decimal_field("internal_dc_input_power", 87, 1)
+        self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
+
+        # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
+        self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
+
+        # Controls
+        self.struct.add_bool_field("power_off", 3060)
+        self.struct.add_enum_field("auto_sleep_mode", 3061, AutoSleepMode)
+
+    @property
+    def pack_num_max(self):
+        return 3
+
+    @property
+    def polling_commands(self) -> List[ReadHoldingRegisters]:
+        return super().polling_commands + [
+            ReadHoldingRegisters(70, 5),
+            ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3060, 2),
+        ]
+
+    @property
+    def writable_ranges(self) -> List[range]:
+        return super().writable_ranges + [range(3060, 3062)]
+
+    @property
+    def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
+            ReadHoldingRegisters(105, 16)
+        ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac200m.py

@@ -13,15 +13,20 @@ class AC200M(ProtocolV1Device):
 
         # Details
         self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
-        self.struct.add_uint_field("internal_ac_voltage", 71)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
         self.struct.add_decimal_field("internal_current_one", 72, 1)
         self.struct.add_uint_field("internal_power_one", 73)
-        self.struct.add_decimal_field("internal_ac_frequency", 74, 1)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
         self.struct.add_uint_field("internal_dc_input_voltage", 86)
         self.struct.add_decimal_field("internal_dc_input_power", 87, 1)
         self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
 
         # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
         self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
 
         # Controls
@@ -35,14 +40,20 @@ class AC200M(ProtocolV1Device):
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
-            ReadHoldingRegisters(70, 4),
+            ReadHoldingRegisters(70, 5),
             ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3060, 2),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
-        return super().writable_ranges + [range(3060, 3061)]
+        return super().writable_ranges + [range(3060, 3062)]
 
     @property
     def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return super().pack_polling_commands + [ReadHoldingRegisters(105, 16)]
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
+            ReadHoldingRegisters(105, 16)
+        ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac300.py

@@ -11,12 +11,12 @@ class AC300(ProtocolV1Device):
     def __init__(self, address: str, sn: str):
         super().__init__(address, "AC300", sn)
 
-        # Details (matches EP500 + AC500)
+        # Details
         self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
-        self.struct.add_uint_field("internal_ac_voltage", 71)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
         self.struct.add_decimal_field("internal_current_one", 72, 1)
         self.struct.add_uint_field("internal_power_one", 73)
-        self.struct.add_decimal_field("internal_ac_frequency", 74, 1)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
         self.struct.add_decimal_field("internal_current_two", 75, 1)
         self.struct.add_uint_field("internal_power_two", 76)
         self.struct.add_decimal_field("ac_input_voltage", 77, 1)
@@ -28,10 +28,15 @@ class AC300(ProtocolV1Device):
         self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
 
         # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
         self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
         self.struct.add_version_field("pack_bms_version", 201)
 
-        # Controls (matches EP500 + AC500)
+        # Controls
         self.struct.add_enum_field("ups_mode", 3001, UpsMode)
         self.struct.add_bool_field("split_phase_on", 3004)
         self.struct.add_enum_field(
@@ -50,20 +55,29 @@ class AC300(ProtocolV1Device):
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
-            ReadHoldingRegisters(70, 10),
+            ReadHoldingRegisters(70, 11),
             ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3001, 1),
+            ReadHoldingRegisters(3004, 2),
+            ReadHoldingRegisters(3011, 1),
+            ReadHoldingRegisters(3013, 1),
+            ReadHoldingRegisters(3015, 2),
+            ReadHoldingRegisters(3061, 1),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
         return super().writable_ranges + [
-            range(3001, 3016),
+            range(3001, 3017),
-            3061,
+            range(3061),
         ]
 
     @property
     def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return super().pack_polling_commands + [
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
             ReadHoldingRegisters(105, 16),
             ReadHoldingRegisters(201, 2),
         ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ac500.py

@@ -11,12 +11,12 @@ class AC500(ProtocolV1Device):
     def __init__(self, address: str, sn: str):
         super().__init__(address, "AC500", sn)
 
-        # Details (matches EP500 + AC300)
+        # Details
         self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
-        self.struct.add_uint_field("internal_ac_voltage", 71)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
         self.struct.add_decimal_field("internal_current_one", 72, 1)
         self.struct.add_uint_field("internal_power_one", 73)
-        self.struct.add_decimal_field("internal_ac_frequency", 74, 1)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
         self.struct.add_decimal_field("internal_current_two", 75, 1)
         self.struct.add_uint_field("internal_power_two", 76)
         self.struct.add_decimal_field("ac_input_voltage", 77, 1)
@@ -27,10 +27,15 @@ class AC500(ProtocolV1Device):
         self.struct.add_decimal_field("internal_dc_input_power", 87, 1)
         self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
 
-        # Battery packs (matches EP500)
+        # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
         self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
 
-        # Controls (matches EP500 + AC300)
+        # Controls
         self.struct.add_enum_field("ups_mode", 3001, UpsMode)
         self.struct.add_bool_field("split_phase_on", 3004)
         self.struct.add_enum_field(
@@ -49,19 +54,28 @@ class AC500(ProtocolV1Device):
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
-            ReadHoldingRegisters(70, 10),
+            ReadHoldingRegisters(70, 11),
             ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3001, 1),
+            ReadHoldingRegisters(3004, 2),
+            ReadHoldingRegisters(3011, 1),
+            ReadHoldingRegisters(3013, 1),
+            ReadHoldingRegisters(3015, 2),
+            ReadHoldingRegisters(3061, 1),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
         return super().writable_ranges + [
-            range(3001, 3016),
+            range(3001, 3017),
-            3061,
+            range(3061),
         ]
 
     @property
     def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return super().pack_polling_commands + [
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
             ReadHoldingRegisters(105, 16),
         ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/eb3a.py

@@ -28,12 +28,15 @@ class EB3A(ProtocolV1Device):
         return super().polling_commands + [
             ReadHoldingRegisters(77, 1),
             ReadHoldingRegisters(86, 1),
+            ReadHoldingRegisters(3034, 1),
+            ReadHoldingRegisters(3060, 1),
+            ReadHoldingRegisters(3063, 5),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
         return super().writable_ranges + [
-            3034,
+            range(3034, 3035),
-            3060,
+            range(3060, 3061),
-            range(3063, 3066),
+            range(3063, 3067),
         ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ep500.py

@@ -11,12 +11,12 @@ class EP500(ProtocolV1Device):
     def __init__(self, address: str, sn: str):
         super().__init__(address, "EP500", sn)
 
-        # Details (matches AC500 + AC300)
+        # Details
         self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
-        self.struct.add_uint_field("internal_ac_voltage", 71)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
         self.struct.add_decimal_field("internal_current_one", 72, 1)
         self.struct.add_uint_field("internal_power_one", 73)
-        self.struct.add_decimal_field("internal_ac_frequency", 74, 1)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
         self.struct.add_decimal_field("internal_current_two", 75, 1)
         self.struct.add_uint_field("internal_power_two", 76)
         self.struct.add_decimal_field("ac_input_voltage", 77, 1)
@@ -27,10 +27,15 @@ class EP500(ProtocolV1Device):
         self.struct.add_decimal_field("internal_dc_input_power", 87, 1)
         self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
 
-        # Battery packs (matches AC500)
+        # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
         self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
 
-        # Controls (matches AC500 + AC300)
+        # Controls
         self.struct.add_enum_field("ups_mode", 3001, UpsMode)
         self.struct.add_bool_field("split_phase_on", 3004)
         self.struct.add_enum_field(
@@ -45,19 +50,28 @@ class EP500(ProtocolV1Device):
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
-            ReadHoldingRegisters(70, 10),
+            ReadHoldingRegisters(70, 11),
             ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3001, 1),
+            ReadHoldingRegisters(3004, 2),
+            ReadHoldingRegisters(3011, 1),
+            ReadHoldingRegisters(3013, 1),
+            ReadHoldingRegisters(3015, 2),
+            ReadHoldingRegisters(3061, 1),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
         return super().writable_ranges + [
-            range(3001, 3016),
+            range(3001, 3017),
-            3061,
+            range(3061),
         ]
 
     @property
     def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return super().pack_polling_commands + [
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
             ReadHoldingRegisters(105, 16),
         ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ep500p.py

@@ -11,12 +11,12 @@ class EP500P(ProtocolV1Device):
     def __init__(self, address: str, sn: str):
         super().__init__(address, "EP500P", sn)
 
-        # Details (matches AC500 + AC300)
+        # Details
         self.struct.add_enum_field("ac_output_mode", 70, OutputMode)
-        self.struct.add_uint_field("internal_ac_voltage", 71)
+        self.struct.add_decimal_field("internal_ac_voltage", 71, 1)
         self.struct.add_decimal_field("internal_current_one", 72, 1)
         self.struct.add_uint_field("internal_power_one", 73)
-        self.struct.add_decimal_field("internal_ac_frequency", 74, 1)
+        self.struct.add_decimal_field("internal_ac_frequency", 74, 2)
         self.struct.add_decimal_field("internal_current_two", 75, 1)
         self.struct.add_uint_field("internal_power_two", 76)
         self.struct.add_decimal_field("ac_input_voltage", 77, 1)
@@ -27,10 +27,15 @@ class EP500P(ProtocolV1Device):
         self.struct.add_decimal_field("internal_dc_input_power", 87, 1)
         self.struct.add_decimal_field("internal_dc_input_current", 88, 2)
 
-        # Battery packs (matches AC500)
+        # Battery packs
+        self.struct.add_uint_field("pack_num_max", 91)  # internal
+        self.struct.add_decimal_field("total_battery_voltage", 92, 1)
+        self.struct.add_uint_field("pack_num", 96)  # internal
+        self.struct.add_decimal_field("pack_voltage", 98, 2)  # Full pack voltage
+        self.struct.add_uint_field("pack_battery_percent", 99)
         self.struct.add_decimal_array_field("cell_voltages", 105, 16, 2)  # internal
 
-        # Controls (matches AC500 + AC300)
+        # Controls
         self.struct.add_enum_field("ups_mode", 3001, UpsMode)
         self.struct.add_bool_field("split_phase_on", 3004)
         self.struct.add_enum_field(
@@ -45,19 +50,28 @@ class EP500P(ProtocolV1Device):
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
-            ReadHoldingRegisters(70, 10),
+            ReadHoldingRegisters(70, 11),
             ReadHoldingRegisters(86, 3),
+            ReadHoldingRegisters(3001, 1),
+            ReadHoldingRegisters(3004, 2),
+            ReadHoldingRegisters(3011, 1),
+            ReadHoldingRegisters(3013, 1),
+            ReadHoldingRegisters(3015, 2),
+            ReadHoldingRegisters(3061, 1),
         ]
 
     @property
     def writable_ranges(self) -> List[range]:
         return super().writable_ranges + [
-            range(3001, 3016),
+            range(3001, 3017),
-            3061,
+            range(3061),
         ]
 
     @property
     def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-        return super().pack_polling_commands + [
+        return [
+            ReadHoldingRegisters(91, 2),
+            ReadHoldingRegisters(96, 1),
+            ReadHoldingRegisters(98, 2),
             ReadHoldingRegisters(105, 16),
         ]

custom_components/bluetti_bt/bluetti_bt_lib/devices/ep600.py

@@ -79,10 +79,6 @@ class EP600(ProtocolV2Device):
         self.struct.add_version_field("safety_module_version", 6181)  # internal
         self.struct.add_version_field("high_voltage_module_version", 6184)  # internal
 
-    # @property
-    # def pack_num_max(self):
-    #    return 16
-
     @property
     def polling_commands(self) -> List[ReadHoldingRegisters]:
         return super().polling_commands + [
@@ -105,10 +101,3 @@ class EP600(ProtocolV2Device):
             ReadHoldingRegisters(156, 1),
             ReadHoldingRegisters(158, 1),
         ]
-
-    # @property
-    # def pack_polling_commands(self) -> List[ReadHoldingRegisters]:
-    #    return super().pack_polling_commands + [
-    #        ReadHoldingRegisters(6101, 10),
-    #        ReadHoldingRegisters(6175, 12),
-    #    ]

custom_components/bluetti_bt/bluetti_bt_lib/field_attributes.py

@@ -18,7 +18,6 @@ class FieldType(Enum):
     NUMERIC = auto()
     BOOL = auto()
     ENUM = auto()
-    BUTTON = auto()
 
 
 class FieldAttributes:
@@ -220,7 +219,7 @@ FIELD_ATTRIBUTES: dict[str, FieldAttributes] = {
     "total_grid_feed": EnergyFieldAttributes("Total Grid Feed"),
     # Device specific controls
     "power_off": FieldAttributes(
-        type=FieldType.BUTTON,
+        type=FieldType.BOOL,
         setter=True,
         name="Power Off",
     ),
@@ -294,7 +293,7 @@ FIELD_ATTRIBUTES: dict[str, FieldAttributes] = {
     ),
     "power_lifting_on": FieldAttributes(
         type=FieldType.BOOL,
-        setter=False,  # Disabled for safety reasons
+        setter=True,
         name="Power Lifting",
     ),
 }

custom_components/bluetti_bt/bluetti_bt_lib/utils/device_builder.py

@@ -3,6 +3,9 @@
 import re
 
 from ..devices.ac60 import AC60
+from ..devices.ac180 import AC180
+from ..devices.ac180p import AC180P
+from ..devices.ac200l import AC200L
 from ..devices.ac200m import AC200M
 from ..devices.ac300 import AC300
 from ..devices.ac500 import AC500
@@ -14,7 +17,7 @@ from ..devices.ep760 import EP760
 from ..devices.ep800 import EP800
 
 DEVICE_NAME_RE = re.compile(
-    r"^(AC60|AC200M|AC300|AC500|EB3A|EP500|EP500P|EP600|EP760|EP800)(\d+)$"
+    r"^(AC60|AC180|AC180P|AC200L|AC200M|AC300|AC500|EB3A|EP500|EP500P|EP600|EP760|EP800)(\d+)$"
 )
 
 
@@ -22,6 +25,12 @@ def build_device(address: str, name: str):
     match = DEVICE_NAME_RE.match(name)
     if match[1] == "AC60":
         return AC60(address, match[2])
+    if match[1] == "AC180":
+        return AC180(address, match[2])
+    if match[1] == "AC180P":
+        return AC180P(address, match[2])
+    if match[1] == "AC200L":
+        return AC200L(address, match[2])
     if match[1] == "AC200M":
         return AC200M(address, match[2])
     if match[1] == "AC300":

custom_components/bluetti_bt/const.py

@@ -26,8 +26,11 @@ SUPPORTED_MODELS = [
 ]
 
 CONTROL_FIELDS = [
-    "ac_output_on",
+    "ac_output_on_switch",
-    "dc_output_on",
+    "dc_output_on_switch",
+    "power_off",
+    "eco_on",
+    "power_lifting_on",
 ]
 
 DIAGNOSTIC_FIELDS = [

custom_components/bluetti_bt/manifest.json

@@ -2,10 +2,12 @@
     "domain": "bluetti_bt",
     "name": "Bluetti BT",
     "bluetooth": [
+        { "local_name": "AC60*" },
+        { "local_name": "AC180*" },
+        { "local_name": "AC200L*" },
         { "local_name": "AC200M*" },
         { "local_name": "AC300*" },
         { "local_name": "AC500*" },
-        { "local_name": "AC60*" },
         { "local_name": "EB3A*" },
         { "local_name": "EP500*" },
         { "local_name": "EP600*" },
@@ -15,11 +17,11 @@
     ],
     "codeowners": ["@Patrick762"],
     "config_flow": true,
-    "dependencies": ["bluetooth"],
+    "dependencies": ["bluetooth_adapters"],
     "documentation": "https://github.com/Patrick762/hassio-bluetti-bt",
     "integration_type": "device",
     "iot_class": "local_polling",
     "issue_tracker": "https://github.com/Patrick762/hassio-bluetti-bt/issues",
     "requirements": [],
-    "version": "0.0.18"
+    "version": "0.0.22"
 }

custom_components/bluetti_bt/sensor.py

@@ -175,10 +175,9 @@ class BluettiSensor(CoordinatorEntity, SensorEntity):
         if (
             self._options is not None
             and isinstance(response_data, Enum)
-            and response_data.value < len(self._options)
         ):
             # Enum
-            self._attr_native_value = self._options[response_data.value]
+            self._attr_native_value = response_data.name
         else:
             # Numeric
             self._attr_native_value = response_data

test.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+# Execute unittests of python library
+python3 -m unittest discover -s tests -p "*_test.py"

tests/device_builder_test.py

@@ -0,0 +1,124 @@
+"""Unittest for device builder."""
+
+import unittest
+
+from custom_components.bluetti_bt.bluetti_bt_lib.utils.device_builder import build_device
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac60 import AC60
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac180 import AC180
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac180p import AC180P
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac200m import AC200M
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac300 import AC300
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ac500 import AC500
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.eb3a import EB3A
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ep500 import EP500
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ep500p import EP500P
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ep600 import EP600
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ep760 import EP760
+from custom_components.bluetti_bt.bluetti_bt_lib.devices.ep800 import EP800
+
+
+class TestDeviceBuilder(unittest.TestCase):
+    def test_build_Unknow(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "PBOX56786746478"
+        with self.assertRaises(TypeError):
+            build_device(bt_addr, bt_name)
+
+    def test_build_ac60(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC6056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC60)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ac180(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC18056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC180)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ac180p(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC180P56786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC180P)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ac200m(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC200M56786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC200M)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ac300(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC30056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC300)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ac500(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "AC50056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, AC500)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_eb3a(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EB3A56786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EB3A)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ep500(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EP50056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EP500)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_ep500p(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EP500P56786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EP500P)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_EP600(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EP60056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EP600)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_EP760(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EP76056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EP760)
+        self.assertEqual(built.address, bt_addr)
+
+    def test_build_EP800(self):
+        bt_addr = "aa:bb:cc:dd:ee:ff"
+        bt_name = "EP80056786746478"
+        built = build_device(bt_addr, bt_name)
+
+        self.assertIsInstance(built, EP800)
+        self.assertEqual(built.address, bt_addr)
+
+if __name__ == '__main__':
+    unittest.main()