Refactor SEN0590 sensor implementation: update command and data register handling, improve error logging, and enhance distance measurement validation.

components/sen0590/sen0590.cpp

@@ -1,3 +1,4 @@
+#include "sen0590.h"
 #include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/component.h"
@@ -8,42 +9,50 @@ namespace esphome {
 namespace sen0590 {
 
 static const char *const TAG = "sen0590";
-static const uint8_t COMMAND_REG = 0x10;
+static const uint8_t COMMAND_REG = 0x00;
-static const uint8_t DATA_REG = 0x02;
+static const uint8_t DATA_REG_HIGH = 0x01;
+static const uint8_t DATA_REG_LOW = 0x02;
 static const uint8_t MEASURE_COMMAND = 0xB0;
 
 class SEN0590Component : public sensor::Sensor, public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override {
     ESP_LOGD(TAG, "Setting up SEN0590 laser distance sensor...");
-    // Power-on delay time is ≤800ms according to specs
+    if (!this->write_byte(COMMAND_REG, 0x00)) {
-    delay(800);
+      ESP_LOGE(TAG, "SEN0590 not responding. Check wiring and address.");
+      this->mark_failed();
+      return;
+    }
+    ESP_LOGD(TAG, "SEN0590 Setup complete.");
   }
 
   void update() override {
-    // Send measurement command
     if (!this->write_byte(COMMAND_REG, MEASURE_COMMAND)) {
-      ESP_LOGE(TAG, "Failed to write command");
+      ESP_LOGW(TAG, "Failed to send measurement command");
       this->status_set_warning();
       return;
     }
 
-    // Wait for measurement to complete
     delay(50);
 
-    // Read measurement result
     uint8_t buffer[2];
-    if (!this->read_bytes(DATA_REG, buffer, 2)) {
+    if (this->read_register(DATA_REG_HIGH, &buffer[0], 1) != i2c::ERROR_OK ||
-      ESP_LOGE(TAG, "Failed to read distance data");
+        this->read_register(DATA_REG_LOW, &buffer[1], 1) != i2c::ERROR_OK) {
+      ESP_LOGW(TAG, "Failed to read distance data");
+      this->status_set_warning();
+      return;
+    }
+
+    int distance_mm = (buffer[0] << 8) | buffer[1];
+    if (distance_mm == 0xFFFF) {
+      ESP_LOGW(TAG, "Received invalid distance data (0xFFFF)");
       this->status_set_warning();
       return;
     }
 
-    // Calculate distance in mm and convert to cm
-    int distance_mm = (buffer[0] << 8) + buffer[1] + 10;
     float distance_cm = distance_mm / 10.0f;
 
-    ESP_LOGD(TAG, "Distance: %.1f cm", distance_cm);
+    ESP_LOGD(TAG, "Distance: %.1f cm (Raw: %d mm)", distance_cm, distance_mm);
     this->publish_state(distance_cm);
     this->status_clear_warning();
   }